Projecting from the Multi-Standard VCR
Insert a VHS tape into the multi-standard VCR in the rack. Select Multi-VHS on the Crestron Touch-Screen Panel. Use the touch panel to play, pause, rewind etc.
VCR
Projecting from the Multi-standard VCR
Insert the videotape. Press the M-VHS button on the Extron Switcher. Use the VCR remote or the VCR's onboard controls to play, pause, rewind, etc.
Projecting from the VCR
- Turn on the VCR on the equipment rack and insert VHS tape.
- Above the VCR is a switcher with two active buttons. Select VCR.
- Use the VCR's controls to play, rewind, etc.
Projecting from the multi-standard VCR:
- Select the green VCR-2 source button on the Extron System 7sc Switcher located in the equipment rack.
- Insert a videocassette into the VCR deck.
- Use the VCR's remote or VCR's onboard controls to play, pause, stop, rewind and fast-forward the tape.
Projecting from the Multi-Standard VCR
- Turn on the Samsung VCR in the equipment rack.
- Insert videotape. Acceptable formats include NTSC, PAL, and SECAM.
- On the Extron wall panel, press Display Power. Note: A green light will flash on the projector. It may take 45 seconds to reach full brightness.
- On the Extron wall panel, select the Composite Video button.
- Use the VCR remote located in the remote control bin or the VCR's onboard controls to play the videotape.