PNE-239 Equipment Instructions

Projecting from the Document Camera

• Press the DOC button on the Crestron Remote Control.
• Unfold and raise the light arms on the document camera as far as they will go. Firmly press the lever on the camera arm downward and raise the camera head so the arm is at a 45' angle and the camera points straight down.
• Press the Lamp button on the document camera to turn on the lights on either side of the document camera.
• Turn on the document camera by pressing the Green Power Button on the left of its control panel.
• The projector should display documents and objects that are placed on the bed of the document camera.
• When switching documents/objects, you can press the Freeze button on the document camera to freeze an image on the projection screen. Press the Freeze button again to exit the freeze mode.
• To display transparencies, press the Lamp button on the document camera once. The panel underneath the bed will light up and the arm lights will turn off. To turn the lights off entirely, press the Lamp button again.
• You can zoom in and out with the Zoom buttons. If the image becomes unfocused, adjust the focus with the focus buttons.
• When you are finished, turn the document camera off with the power button.

Watching a Channel on WCVN (Cable TV)

Press the green WCVN source button on the Crestron Remote Control.  Make sure the VCR is powered on.  To scan channels press one of the blue Chan Up/Down buttons on the remote control.  To select a specific channel use the black number buttons.