PNE-130 Equipment Instructions

Formal Name: 
Pendleton East 130 Classroom
Layouts: 
*Physical Distancing
Max Capacity: 
30
Features: 

I S:Computer, Macintosh
I S:Computer, Windows(16)
I S:Printer
I S:Projection Screen(2)
I S:Projector, L C D(2)
I S:V C R, Multi-country

AV Controls

  • Wall Rack, next to the blackboard.
  • Built-in Control Panel, on the instructor desk.
  • The Crestron Remote Control, on the instructor desk.  Look for the black remote with green, blue, yellow, and red buttons.

Turning on the Projector

Once a source is selected on the Crestron Remote Control, the projector will turn on automatically.  Note it may take up to a minute to reach full brightness.

Projection Screen

Once a source is selected on the Crestron Remote Control, the projection screen will automatically drop down.  Alternatively, use the Up/Down button.

Lights

On the built-in control panel, select one of the preset light settings by pressing the corresponding button:

  1. All lights on
  2. Room lights dimmed, screen lights off: ideal for screen viewing while students are taking notes.

Projecting from the PC

Confirm the PC is on (power button should be lit).  Press the green PC Comp button for the side or center screen on the remote control.  To see what is being projected on the instructor's computer monitor, press the green PC button in the Podium Monitor Source section of the remote control.

Projecting from the Mac

Confirm the Mac is on.  Press the green Mac Comp button for the side or center screen on the remote control.  To see what is being projected on the instructor's computer monitor, press the green Mac button in the Podium Monitor Source section of the remote control.

Projecting from a Laptop

  • Locate the VGA/audio cables on the instructor desk and connect to the laptop.
  • Press the green Laptop button on the remote control to display the laptop screen.

Volume/Mute

To adjust the volume, use the yellow buttons on the Crestron Remote Control: Source Up, Source Down, or Mute.

Projecting from the VCR

Select the green VCR source button on the Crestron Remote Control.  Insert a tape into the VCR in the equipment rack.  Use the blue play, pause, stop, rewind and fast-forward buttons on the remote control.