SCI-E101 Equipment Instructions

Formal Name: 
Science Center E Wing 101 Computer Science Computer Classroom
Layouts: 
*Physical Distancing
Max Capacity: 
30
Features: 

I S:Computer, Macintosh(16)
I S:Computer, Windows
I S:Printer
I S:Projection Screen(2)
I S:Projector, L C D
I S:Scanner
I S:V C R, U.S.A. Only

AV Controls

  • On the equipment rack, the Extron Switcher Panel has 7 active buttons for selecting source inputs. Press the respective button for the source you intend to use.
  • Video source remotes are located in either the equipment rack's pullout drawer or on the desk/table.
Volume/Mute
 
Rotate the knob Volume on the Extron Switcher.

Projection Screen

There is a fixed wall-mounted projection screen.

Turning on the Projector

Locate the Extron Switcher. Press and hold for 5 seconds the Display Power button to turn on the projector. The Display Power button will illuminate and the projector will take approximately 45 seconds to reach full brightness.
 

Projecting from the PC

Confirm the PC is on (power button is lit).  Select the PC button on the Extron Switcher.

Projecting from the Mac

Confirm the Mac is on.  Select the Mac button on the Extron Switcher.

Projecting from a Laptop

  • Locate the VGA/audio cables on the instructor desk or in the equipment drawer.  Connect one end of the cables to the laptop and the other end to the Computer connection on the front of the Extron Switcher.
  • Press the Laptop button on the Extron Switcher to display the laptop screen.

Projecting from the VCR

Insert the videotape into the VCR.  Press the VCR button on the Extron Switcher.  Use the VCR's remote or onboard controls to play, pause, stop, etc.

Turning off the Projector

To turn off the projector, press and hold for five seconds the green Display Power button on the Extron Switcher.
 
NOTE: The projector will need a few minutes to cool down before it can be turned on again.